♡Care Instructions♡
These are recommendations and Tsundere Aesthetic is not responsible for any potential damage.
Thigh High Care Instructions
-Wash in cold or lukewarm water.
-Do not use detergent or washing powder containing bleach components, with the exception to our white only design, bleach may be used.
-Dry on a low temperature or air dry, temperatures that are too high will lead to deformation and/or shrinkage of the socks.
-Keep darks and lights separate.
-White or light coloured socks can be soaked for 1-2 hours for best results. Do not soak dark colours too long in order to avoid fading the colours.
-Avoid over washing to keep your socks from deforming quickly.
-When washing socks for the first time, you can add some salt to the water to make the socks less susceptible to fading.
-Place in a protective laundry bag for extra protection. This is highly suggested and will help protect against snags.
-Avoid snagging the material on zippers, hooks or other sharp edges.
If this happens it is sometimes possible to hide the damage by pulling the snagged thread through to the inside of the sock and pulling the sock tight. This will help realign and hide the string as much as possible.
Backpack Care Instructions
1. Hand Wash with a soft washcloth, warm water and a natural, gentle cleaner. We recommend ScrubDaddy brand Power Paste.
2. To fix any dents in the leather from shipping, storage, etc;
-Place the backpack in a pillowcase or cloth bag for extra protection if desired.
-Place in a dryer on a low, gentle setting.
-Run the dryer for approximately 20 second. The backpack should get soft and fairly warm.
-Remove backpack and use fingers to gently push and pull at the creases to flatten them. Be cautious of hot metal pieces. Wearing soft gloves can help shape the bag smoothly and prevent gripping of the material.
-Fill with soft packing material/cloth and hang up to help shape the bag while it cools.
-Do not overheat or burning and damage will occur.
-Let the backpack fully cool and repeat if necessary.
-A hand dryer on low heat can also be used, keep the dryer a few inches from the leather.
Artisan Keycap Care Instructions
Applying your keycap: gently press onto the switch stem, being careful not to force it on.
Removing your keycap: use a keycap puller and very gently pull off. Take your time and if it’s tight you can wiggle it a bit to loosen.
Keep out of direct sunlight and UV light to prevent discoloration.
-Dust with a clean, soft cloth or brush and/or compressed air.
-Clean with lukewarm water, use your fingers or a soft, gentle cloth to gently wash away debris. A very mild soap mixed into the water may also be used but be cautious and use a small amount. Rinse with lukewarm water after using any soap.
-Avoid any cleaners with harsh detergents or chemicals. This will damage the resin, paints and polymer clay.
-Use a fresh, soft cloth to gently dry.
-Cloths that won’t leave fibers/lint behind are recommended.
-Finish completely drying by air drying overnight on a clean surface.
Keycaps are a choking hazard and must be kept away from young children and pets at all times.
Headset Attachment Care Instructions
Keep out of direct sunlight and UV light to prevent discoloration.
-Dust with a clean, soft cloth or brush and/or compressed air.
-Clean with lukewarm water or a lukewarm water and mild soap mixture. Use a soft, gentle cloth to wash, using gentle circular motions for tough spots. Rinse off any soap with lukewarm water.
-Use a fresh soft cloth to gently dry.
-Cloths that won’t leave fibers/lint behind are recommended.
-Avoid any cleaners with harsh detergents or chemicals. This will strip glue and damage the surface.
-Finish completely drying by air drying overnight on a clean surface.
Thigh Belt Care Instructions
1. Hand wash with a washcloth, warm water and gentle soap.
2. Air dry only
Stainless Steel Accessories Care Instructions
-Remove any additional parts before cleaning to prevent damage. This is for stainless steel parts only.
-Gently wipe the stainless steel pieces with the soft polishing cloth provided to remove surface dirt, dust and smudges.
-Wash with mild soap/mild dish soap or baking soda mixed with warm water. You can also use a stainless steel jewelry cleaner or a commercial jewelry cleaning solution.
-Clean with a soft brush, use gentle circular motions to remove dirt build up.
-Rinse with warm water.
-Dry thoroughly with a lint free soft cloth. Don’t let the jewelry sit in water or remain wet for an extended period.
-Once completely dry, carefully reassemble any detached parts.